Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Digital Design

Design furniture and plan woodworking projects with SketchUp and other CAD tools. Get help with 3D models, measured drawings, and cut lists.

  1. Started by FurniCore,

    Hey everyone, I’m a custom cabinet maker who wanted a much faster way to lay out boxes, calculate edge banding deductions, and generate sheet nesting without dealing with heavy, overpriced desktop CAD software. Over the past few months, I’ve been developing FurniCore — a lightweight parametric 2D/3D CAD/CAM tool that runs directly in any browser with zero installation. Here is a quick 2-minute walkthrough of the full workflow from a blank screen to a production-ready cut-list: 0:00 — Setting up cabinet dimensions (supports both fractional inches and metric mm) & automated facade/drawer gap math 0:50 — Automatic edge banding thickness deduction &am…

  2. I'm happy using (and paying for) Sketchup Pro, but I'm getting fed up with Microsoft Windows. The last time I tried switching to Linux, I gave up because there was no (acceptable) way to run Sketchup. My research says that Sketchup won't run on Linux: not in Wine, not in a virtual machine. I spent 3 years as a unix/Linux sysadmin, so I'd have no trouble using Linux. I just need something that will run the apps I use. Does anyone have experience using FreeCad for woodworking design? Any advice for woodworking design software that runs on Linux? I realize that asking about Linux on WTO is a long shot, but I figure it's worth a shot.

  3. Hey everyone. Probably a softball question here, but I'm designing some new bathroom furniture and we're loving lots of curves in the design. While I have everything roughly how I like it now, I'm faced with the quandary of how I actually create these curves in the wood! I have a drawing bow, but it's a fiddly way to do things and I'm wondering if there's something simpler and more exact that I'm missing. I know how I'm creating the detail on the bottom of the face frame -- it's a 3 point curve from 3.5 inches down then up to the center point, but given that the width varies between these two pieces, I know the curve is different. I honestly have no idea how I got the cur…

      • Like
    • 10 replies
    • 7.4k views
  4. Started by Mark J,

    Reading through the post: Sketchup 2018, it's good to see that Sketchup Make 2017 is still available. But it also seems that there are a lot of alternative design programs. For those who don't have a huge investment in Sketchup maybe it's time to consider a succesor or at least an alternative. What would that be?

      • Confused
      • Like
    • 34 replies
    • 21.7k views
  5. Started by dog2bert,

    I am trying figure out the angles to build a dodecahedron (12 sided) speaker cabinet. How would I go about creating this in Sketchup as a whole and then just one side? Also, how might I cut the sides at the table saw?

      • Like
    • 12 replies
    • 39.8k views
  6. Started by Peepaw,

    Hello everybody. I'm going to build a cradle for my grandson and need help. Hopefully the images are clear. Could everyone weigh in on the design? Maybe tweak a feature or a proportion? Also I'm planning on using cherry as a main wood. Maybe walnut or Sapele for an accent. What are your thoughts? Thanks in advance, you guys are the best. By the way this is designed in Solidworks.

    • 8 replies
    • 9k views
  7. Started by Steve Diesel,

    Tried SketchUp to work out some ideas for a couple of projects I had in mind. It was great, but I have absolutely fallen in love with Fusion 360. Bit of a learning curve for sure, but I'm having a blast with it. Currently doing the rough cuts on a hobby shelf I designed for my desk (for painting miniatures and terrain making for rpg's and wargaming). 36" x 48" x 9". Part bookshelf for my primary gaming books, 3=tiered paint rack and other shelving/nooks for materials as well as a 24x18 pegboard to hang my hobby tools. Most of it will be joined using stop dados and grooves, but still undecided about how to join a couple of sections. Just as a side note, embarras…

  8. Started by Mark J,

    I heard about this new (to me) CAD program. The 30 min video is worth the watch if you're interested in CAD. The program looks like it would be easier to learn than Fusion 360. It is not parametric, but somewhere between SketchUp and F.360. I'm told, but can't confirm, that it will draw true circles. The free version is pretty limited, so if you like it you're looking at $300/year.

      • Like
    • 6 replies
    • 5.8k views
  9. Started by BillyJack,

    I need to scale this ro 7/8. I have programs, but I'm rusty. I need as many as I can get on a sheet of printer paper. I need ti cut around it, shrink it and apply it to a sheet.

      • Like
    • 22 replies
    • 3.9k views
  10. Started by Toby,

    I guys. I'm new to the forum and have a lot of hardwood veneer that I expected to build a canoe or kayak from. I'm thinking of ways to design the layers of laminations, like for ribs, with the grain direction controlled and sheet (layers of a lamination) cut on a laser for each layer of a plywood structure member. I expect to use epoxy but bought a gallon of fiberglass to try some experiments with saturation. Has anyone used thin veneer to laminate structures....aircraft or boat ribs? My veneer is 1/40". Thanks Toby

      • Like
    • 7 replies
    • 8.3k views
  11. Started by Jeff G,

    Brand new here and my first post! I have my next project in mind and have a cut list. 12 BD FT is what it totals up to assuming 20% waste. Is there a simple program out in cyber world that will help me lay this out so I know ahead of time exacly how I will cut this material. i don't use sketch up although I hope to learn soon. Until then hoping to find something that will allow me to virtually lay out my cuts on a predetermined size board to help me pick the lumber when I go to my hardwood dealer. Thanks in advance!

      • Confused
      • Like
    • 18 replies
    • 13.6k views
  12. Started by Mark J,

    I am working in Sketchup and trying without success to draw a twisted block. What I am talking about is a 6 x 6 x 4 block where the top 6 x 6 face is rotated 45 degrees with respect to the bottom face and each top corner is still connected by a line to the appropriate bottom corner. @Ronn W I am trying for a shorter version of what you drew for your Twisted Leg Table project. Was this in Sketchup? I can twist the top relative to the bottom face, but no matter what I've tried I can't create a curving side that appears smooth. I am trying to depict a turning blank that I will use for a project and I want to try out different proportions and different degrees of …

      • Thanks
    • 15 replies
    • 9k views
  13. Started by sjeff70,

    I was looking through the Guild and I was looking over 'Intro to Sketchup' and started developing some questions I couldn't find answers to. Has anyone input dimensioned drawings from any one of those period furniture books like 'Making Furniture Masterpieces: 30 projects with measured drawings' by Franklin Gotshall into Sketchup? Also, if one goes the route of using Sketchup does it negate the practice of creating full size drawings and using them to transfer measurements to whatever you're building. The Sketchup version taught in the Guild is the web-based version, 'Sketchup Free'. Does anyone see a problem using the latest desktop version (2017), called 'Sketc…

      • Like
    • 14 replies
    • 7.7k views
  14. Started by Hammer5573,

    I'm about to purchase a CAD program to assist my woodworking projects. I'm computer literate but I haven't used any of these programs for furniture design. Can you give me some suggestions for a hobby woodworker...?

  15. Started by Mark J,

    I have the free version of SketchUp 2016 loaded on an old laptop, which I am replacing with a newer machine. I don't want to use a later version of SketchUp as I have a good set of instructions (from Bob Lang) for this version. Has anyone ever transfered SketchUp before? I can tell you what I've done that hasn't worked. I copied the entire SketchUp folder onto a flash from the old HD using Windows Explorer. Then I copied the folder from the flash to the new desktop. When I run SketchUp.exe on the new computer it shows the welcome pade, but asks for license information. SU still runs on the old comuter, which on start up does not ask for license info, and I…

      • Like
      • Thanks
    • 2 replies
    • 7.2k views
  16. Started by Mark J,

    @Bob Lang , or any one else, do you know if the Pro version of SketchUP is able to draw a true circle, or is it still limited to polygon?

    • 0 replies
    • 4.4k views
  17. Started by Mark J,

    Any suggestions for Fusion 360 tutorials? I downloaded the free hobby version last night and have been struggling to get started with it. I have tried some tutorials supplied by Autodesk (Matt Perez) and an independent You Tube from Lars Christiansen and these have not been helpful.

      • Like
      • Thanks
    • 14 replies
    • 7k views
  18. Started by JimReed,

    Please forgive the off-topic post but I just got a new iPad Pro with the Apple Pencil and I was looking for any good recommendations on drawing apps that might work well for woodworking design. I have always struggled with SketchUp (sorry SU fans!) so 99% of the time, I end up sketching my designs the old-fashioned way with pencil and paper but I would really love to find some simple drawing app that might let me take one step closer to simple design nirvana. Thanks for any advice. Jim

      • Like
    • 4 replies
    • 22.3k views
  19. Started by Mark J,

    Does anyone have much experience with Solidworks? A friend of mine suggested the product to me when I was lamenting that neither Sketchup nor Fusion360 were doing quite what I wanted. Solidworks looks a little daunting and there doesn't appear to be a free option as far as I can see at their website. Is it hard or easy to learn and use? Any trial opportunity you know of?

      • Haha
      • Thanks
      • Like
    • 38 replies
    • 13.2k views
  20. Started by SteveKoz,

    Does anyone have a shop layout using Sketchup that they would be willing to share? I'm just getting started with it and it would be so much easier to modify someone else plan, move around pipes and equipment, etc.. than start from scratch. I'm just using the web version. Please PM me if you would be willing to share. Appreciate it! Thanks.

      • Like
    • 3 replies
    • 4.3k views
  21. Started by walidantar,

    48"by30" with two extentios at the siides - extends the bench by 18" at each side .. 18" is suitable for a lot of vises like veritas sliding tale and face .. height is 32.5 .. legs are 3" thick as the bench-top and leg top and bottom faces are flush with the bench front and rear edges legs base and top are 6"by30"by3" and leg-column mortises are 3"by6" are 2"-deep and are 2" offset at the face edges of the leg-base to attach a support for clamping at the side-edge of the tail-vise bench-top apron are 3"by3" actual-size

      • Like
    • 10 replies
    • 4.9k views
  22. Started by Mark J,

    Does anyone know if there is a way to change the color of a line in basic Sketchup? For clarity it would be useful to make some lines a different color than black.

      • Thanks
    • 12 replies
    • 5.4k views
  23. Started by TerryMcK,

    Looks like the pro version is the only one available now. I don't really want to use the free version that is web browser only I have invested a lot of time creating models in Sketchup 2017 (and older) and don't fancy having to pay the exorbitant prices that Trimble are now charging. I am a one man hobby woodshop not some big corporation. Looks as though I will have to stay with Sketchup Make 2017 for now until they start restricting access to the model warehouse too.

  24. Started by collinb,

    Just using the Make version. (Not ready to shell out $695 for the full version until it's needed) Probably the most frustrating thing is that single objects are not automatically grouped but sit there as parts collections. What I'm running into is when things connect to other things at edges then re-selection becomes difficult if not impossible. Is there a way to make a new item automatically its own group? Of course making a group item is not hard, but I would like it to be automatic.

  25. Started by kungsleden,

    I can't figure out how to include a wedge-shaped (short sides with different length) mortice in a stretcher. Actually I have found a way, but it means the stretcher ends up being composed of two pieces. I can draw a shape within a stretcher, but cannot then push to create a mortice. Anyone knows how to do that?

      • Like
    • 10 replies
    • 5.4k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.