Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cleaning plane body

Featured Replies

Hey everyone, looking for some advise on what I should use to clean the sides of my hand plane (block plane) its my first and only hand plane so far just looking for the right way to take care of it. you can see from the photo it has tarnished from the oils on my hands I'm guessing...

IMG_0764.jpg

I used Brasso on mine. Worked great. Works well for brass, too :) ...and I had a used plane sooo tarnished you couldn't see the brass for the iron; was a Brasso workout but results were great.

I use #0000 steel wool, or a really fine scotch-brite pad. I've been told the only way to prevent the build up of patina, or rust if your one of the selects few who's sweat causes rust, is to coat the bare iron with schellac or lacquer. I Hope to try this out on my planes some time this winter.

I use a fine grit eraser block. You can find one here. They work well as long as you work it in the direction of the original polishing. If you go 90 degrees off you will quickly see the different scratches. Works well and is quick and cheap.

  • Author

Thanks for the replies everyone.

Josh, I hadn't thought of that, I have a set of these blocks (course, medium and fine)

Paul, I haven't heard of Brasso before I take a look at it.

  • 5 months later...

For light surface rust like this I use evapo-rust and a paper towel. Typically when you hear about evapo-rust it involves soaking heavily rusted parts. But I have found that if I wet a paper towel, wipe a bit on the surface, let it soak a minute or two then wipe it off with another towel soaked in water it works just as well. No steel wool or sandpaper needed. Just be sure to coat the surface with then oil/wax of your choice immediately afterwords.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.