-
Plans for Darrell Peart's Arched Aurora Nightstand
I had second thought about distributing those CAD files without Darrell's permission. So I sent him a note asking for same. If he doesn't mind, I'll put the CAD files on my blog. Watch this space for an update when I hear back from him. -- Russ
-
Plans for Darrell Peart's Arched Aurora Nightstand
Hi Ryan, Pretty wild coincidence ... I haven't looked at this forum in months, but I did just now and noticed your post. I do have the CAD drawings of not only the templates, but the entire table as well. Send me an email at rrrmac@gmail.com and I'll send you the files. Unfortunately, I can't find my copy of the magazine. -- Russ
-
clamping fixture
Lots of times you can use wedges instead of clamps. -- Russ
-
Is a milkshake food or a drink?
True. But a guy has to come up for air once in a while.
-
Is a milkshake food or a drink?
You guys need to defer to a higher authority on this: http://www.nbc.com/parks-and-recreation/video/swanson-vs-food/n4552/ -- Russ
-
Clamping Jig
The best idea is to have your friend buy you more clamps! If that doesn't work, here's another idea: http://lumberjocks.com/projects/32326 And another variation on the wedge theme: -- Russ
- Russ's Junk
-
Rockler Excelsior mini
Find another one that's trashed (in different ways) and combine the two to make a working one????????? -- Russ
-
help mounting pvc to a machine
A quick and dirty idea would be to run a couple of hose clamps or big nylon cable ties around the back part of the scroll saw and the vertical section of PVC. If that works, done. If not, then look for a Plan B. -- Russ
-
Edge Gluing Veneer Substrate
How about if you start by using the "cutting board method" on just the veneer by itself? That way you would be dealing with just eight strips of veneer at a time rather than 64 little squares. Then you could apply the veneer all at once to a 1/2" thick substrate and live happily ever after. -- Russ
-
Edge Gluing Veneer Substrate
I think the first problem you need to solve is how to glue the checkerboard part together so that the surface comes out perfectly level. Because if it doesn't, you're not going to be able to correct it as you would with a real cutting board because you'll sand right through the veneer. -- Russ
-
Super sturdy exterior doors
This is a quote from the article where they talk about the veneer thickness: Sounds like they were just trying to use the material efficiently. Depending on how thick your "4/4" lumber was to start with, you might only get two slices if you were making them 1/4" thick. -- Russ
-
My super simple and accurate tenoning jig
For super fine adjustments to your jig, you could rig up a stop like this with one more clamp, a scrap of wood, and a drywall screw: http://thesorteddetails.blogspot.com/2011/03/poor-mans-microadjuster.html -- Russ
-
Matching screws - how important?
Match dem screws. Even if nobody else notices, it will tear at your immortal soul if you don't. -- Russ
-
Unexpected woodcraft business! Needs advice
The fine folks at Freud blasted out an email the other day that had a link to some tips for batching out multiple copies of a project. http://s179993888.onlinehome.us/Newsletters/newsletter_12-12/articles/9ProductionShopTricks.pdf -- Russ